Emerging 2D Layered Materials for Perovskite Solar Cells

Perovskite solar cells (PSCs) are now at the forefront of the state‐of‐the‐art photovoltaic technologies due to their high efficiency and low fabrication costs. To further realize the potential of this fascinating class of solar cells, nanostructured functional materials have been playing important roles. 2D layered materials have attracted a great deal of interest due to their fascinating properties and unique structure. Recently, the exploration of a wide range of novel 2D materials for use in PSCs has seen considerable progress, but still a lot remains to be done in this field. In this progress report, the advancements that have recently been made in the application of these emerging 2D materials, beyond graphene, for PSCs are presented. Both the advantages and challenges of these 2D materials for PSCs are highlighted. Finally, important directions for the future advancements toward efficient, low‐cost, and stable PSCs are outlined.     

Suppressing Voltage Fading of Li‐Rich Oxide Cathode via Building a Well‐Protected and Partially‐Protonated Surface by Polyacrylic Acid Binder for Cycle‐Stable Li‐Ion Batteries

Li‐rich manganese based oxides (LRMOs) are considered an attractive high‐capacity cathode for advanced Li‐ion batteries; however, their poor cyclability and gradual voltage fading have hindered their practical applications. Herein, an efficient and facile strategy is proposed to stabilize the lattice structure of LRMOs by surface modification of polyacrylic acid (PAA). The PAA‐coated LRMO electrode exhibits only 104 mV of the voltage fading after 100 cycles and 88% capacity retention over 500 cycles. The structural stability is attributed to the carboxyl groups in PAA chains reacting with oxygen species on the surface of LRMO to form a uniform and tightly coated film, which significantly suppresses the dissolution of transition metal elements from the cathode materials into the electrolyte. Importantly, a H⁺/Li⁺ exchange reaction takes place between the LRMO and PAA, generating a proton‐doped surface layer. Density functional theory calculations and experimental evidence demonstrates that the H⁺ ions in the surface lattice efficiently inhibit the migration of transition metal ions, leading to a stabilized lattice structure. This surface modification approach may provide a new route to building a stable Li‐rich oxide cathode with high capacity retention and low voltage fading for practical Li‐ion battery applications.     

2D Materials for Large‐Area Flexible Thermoelectric Devices

The rapid development of the concept of the “Internet of Things (IoT)” requires wearable devices with maintenance‐free batteries, and thermoelectric energy conversion based on large‐area flexible materials has attracted much attention. Among large‐area flexible materials, 2D materials, such as graphene and related materials, are promising for thermoelectric applications due to their excellent transport properties and large power factors. In this Review, both single‐crystalline and polycrystalline 2D materials are surveyed using the experimental reports on thermoelectric devices of graphene, black phosphorus, transition metal dichalcogenides, and other 2D materials. In particular, their carrier‐density dependent thermoelectric properties and power factors maximized by Fermi level tuning techniques are focused. The comparison of the relevant performances between 2D materials and commonly used thermoelectric materials reveals the significantly enhanced power factors in 2D materials. Moreover, the current progress in thermoelectric module applications using large‐area 2D material thin films is summarized, which consequently offers great potential for the use of 2D materials in large‐area flexible thermoelectric device applications. Finally, important remaining issues and future perspectives, such as preparation methods, thermal transports, device designs, and promising effects in 2D materials, are discussed.     

Boosting Superior Lithium Storage Performance of Alloy‐Based Anode Materials via Ultraconformal Sb Coating–Derived Favorable Solid‐Electrolyte Interphase

Alloy materials such as Si and Ge are attractive as high‐capacity anodes for rechargeable batteries, but such anodes undergo severe capacity degradation during discharge–charge processes. Compared to the over‐emphasized efforts on the electrode structure design to mitigate the volume changes, understanding and engineering of the solid‐electrolyte interphase (SEI) are significantly lacking. This work demonstrates that modifying the surface of alloy‐based anode materials by building an ultraconformal layer of Sb can significantly enhance their structural and interfacial stability during cycling. Combined experimental and theoretical studies consistently reveal that the ultraconformal Sb layer is dynamically converted to Li₃Sb during cycling, which can selectively adsorb and catalytically decompose electrolyte additives to form a robust, thin, and dense LiF‐dominated SEI, and simultaneously restrain the decomposition of electrolyte solvents. Hence, the Sb‐coated porous Ge electrode delivers much higher initial Coulombic efficiency of 85% and higher reversible capacity of 1046 mAh g^?1 after 200 cycles at 500 mA g^?1, compared to only 72% and 170 mAh g^?1 for bare porous Ge. The present finding has indicated that tailoring surface structures of electrode materials is an appealing approach to construct a robust SEI and achieve long‐term cycling stability for alloy‐based anode materials.     

Half‐Heusler Thermoelectric Module with High Conversion Efficiency and High Power Density

Half‐Heusler (HH) compounds have shown great potential in waste heat recovery. Among them, p‐type NbFeSb and n‐type ZrNiSn based alloys have exhibited the best thermoelectric (TE) performance. However, TE devices based on NbFeSb‐based HH compounds are rarely studied. In this work, bulk volumes of p‐type (Nb_0.8Ta_0.2)_0.8Ti_0.2FeSb and n‐type Hf_0.5Zr_0.5NiSn_0.98Sb_0.02 compounds are successfully prepared with good phase purity, compositional homogeneity, and matchable TE performance. The peak zTs are higher than 1.0 at 973 K for Hf_0.5Zr_0.5NiSn_0.98Sb_0.02 and at 1200 K for (Nb_0.8Ta_0.2)_0.8Ti_0.2FeSb. Based on an optimal design by a full‐parameters 3D finite element model, a single stage TE module with 8 n‐p HH couples is assembled. A high conversion efficiency of 8.3% and high power density of 2.11 W cm^?2 are obtained when hot and cold side temperatures are 997 and 342 K, respectively. Compared to the previous TE module assembled by the same materials, the conversion efficiency is enhanced by 33%, while the power density is almost the same. Given the excellent mechanical robustness and thermal stability, matchable thermal expansion coefficient and TE properties of NbFeSb and ZrNiSn based HH alloys, this work demonstrates their great promise for power generation with both high conversion efficiency and high power density.     

Redox‐Active Organic Compounds for Future Sustainable Energy Storage System

Utilizing redox‐active organic compounds for future energy storage system (ESS) has attracted great attention owing to potential cost efficiency and environmental sustainability. Beyond enriching the pool of organic electrode materials with molecular tailoring, recent scientific efforts demonstrate the innovations in various cell chemistries and configurations. Herein, recent major strategies to build better organic batteries, are highlighted: diversifying charge‐carrying ions, modifying electrolytes, and utilizing liquid‐type organic electrodes. Each approach is summarized along with their advantages over Li‐ion batteries (LIBs). An outlook is also provided on the practical realization of organic battery systems, which hints at possible solutions for future sustainable ESSs.     

Development of Dopant‐Free Organic Hole Transporting Materials for Perovskite Solar Cells

There has been considerable progress over the last decade in development of the perovskite solar cells (PSCs), with reported performances now surpassing 25.2% power conversion efficiency. Both long‐term stability and component costs of PSCs remain to be addressed by the research community, using hole transporting materials (HTMs) such as 2,2′,7,7′‐tetrakis(N,N′‐di‐pmethoxyphenylamino)‐9,9′‐spirbiuorene(Spiro‐OMeTAD) and poly[bis(4‐phenyl)(2,4,6‐trimethylphenyl)amine] (PTAA). HTMs are essential for high‐performance PSC devices. Although effective, these materials require a relatively high degree of doping with additives to improve charge mobility and interlayer/substrate compatibility, introducing doping‐induced stability issues with these HTMs, and further, additional costs and experimental complexity associated with using these doped materials. This article reviews dopant‐free organic HTMs for PSCs, outlining reports of structures with promising properties toward achieving low‐cost, effective, and scalable materials for devices with long‐term stability. It summarizes recent literature reports on non‐doped, alternative, and more stable HTMs used in PSCs as essential components for high‐efficiency cells, categorizing HTMs as reported for different PSC architectures in addition to use of dopant‐free small molecular and polymeric HTMs. Finally, an outlook and critical assessment of dopant‐free organic HTMs toward commercial application and insight into the development of stable PSC devices is provided.     

Dopamine Semiquinone Radical Doped PEDOT:PSS: Enhanced Conductivity,Work Function and Performance in Organic Solar Cells

Poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) has been is applied as hole transport material in organic electronic devices for more than 20 years. However, the redundant sulfonic acid group of PEDOT:PSS has often been overlooked. Herein, PEDOT:PSS‐DA is prepared via a facile doping of PEDOT:PSS with dopamine hydrochloride (DA·HCl) which reacts with the redundant sulfonic acid of PSS. The PEDOT:PSS‐DA film exhibits enhanced work function and conductivity compared to those of PEDOT:PSS. PEDOT:PSS‐DA‐based devices show a power conversion efficiency of 16.55% which is the highest in organic solar cells (OSCs) with (poly[(2,6‐(4,8‐bis(5‐(2‐ethylhexyl)‐4‐fluorothiophen‐2‐yl)benzo[1,2‐b:4,5‐b′]dithio‐phene))‐co‐(1,3‐di(5‐thiophene‐2‐yl)‐5,7‐bis(2‐ethylhexyl)‐benzo[1,2‐c:4,5‐c′]dithiophene‐4,8‐dione))] (PM6):(2,2′‐((2Z,2′Z)‐((12,13‐bis(2‐ethylhexyl)‐3,9‐diundecyl‐12,13‐dihydro‐[1,2,5]thiadiazolo[3,4‐e]thieno[2′′,3′:4′,5′]thieno[2′,3′:4,5]pyrrolo[3,2‐g]thieno[2′,3′:4,5]thieno[3,2‐b]indole‐2,10‐diyl)bis(methanylylidene))bis(5,6‐difluoro‐3‐oxo‐2,3‐dihydro‐1H‐indene‐2,1‐diylidene))dimalononitrile) (Y6) as the active layer. Furthermore, PEDOT:PSS‐DA also exhibits enhanced performance in three other donor/acceptor systems, exhibiting high compatibility in OSCs. This work demonstrates that doping PEDOT:PSS with various amino derivatives is a potentially efficient strategy to enhance the performance of PEDOT:PSS in organic electronic devices.     

Photoluminescence and piezoelectric behaviour of Y2Zr2O7 pyrochlore‐based multifunctional materials and the influence of Eu3+ and Sm3+

Y₂Zr₂O₇‐doped with Eu³⁺ and Sm³⁺ phosphors were prepared for the first time as multifunctional smart materials using a solid‐state reaction method at 1400^oC. Thermal behaviour, crystal structure, surface morphology, and elemental analysis were characterized using thermogravimetric (TG) and differential thermal (DTA) analyses, X‐ray diffraction (XRD) and scanning electron microscope equipped with energy‐dispersive X‐ray spectroscopy (SEM‐EDX). Experimental results revealed that both phosphors have a pyrochlore structure with a cubic crystal system. Photoluminescence properties were also measured and red emission was observed from Y_1.90Eu_0.10Zr₂O₇ and Y_1.90Sm_0.10Zr₂O₇ phosphors. Dielectric constant, loss tangent, piezoelectric charge constant, and Curie temperature of all the samples were determined using an LCR‐meter, d₃₃‐meter, and TG/DTA. Eu doping in Y₂Zr₂O₇ resulted in a high dielectric constant (9.61) and low loss tangent (1.67%) values, whereas high piezoelectric charge constant (0.68 pC/N) and high Curie temperature (820°C) could be obtained using Sm‐doped Y₂Zr₂O₇.     

不同熟化措施对黑土母质发育的新成土壤有机碳库的影响

基于8年田间定位试验,采用土壤团聚体分组和闭蓄态微团聚体分离技术,将土壤有机质分为总粗颗粒有机质(活性碳库)、总细颗粒有机质(慢性碳库)和总粉黏粒(惰性碳库) 3个组分,探讨不同熟化措施对黑土母质发育而成的新成土壤总有机碳库及不同活性有机碳库的影响,为黑土严重侵蚀地区母质表露后土壤肥力的快速恢复提供依据。试验设置自然恢复(NatF)、苜蓿种植(Alfa)、无肥(F0C0)、化肥(F1C0)、低量有机肥与化肥配施(F1C1)、高量有机肥与化肥配施(F1C2)等6个熟化处理。结果表明:黑土母质经过8年不同熟化处理后,土壤总有机碳和各组分有机碳含量均显著提高;与NatF相比,有机肥与化肥配施(F1C2和F1C1)对土壤总有机碳的提升作用最为明显,增幅分别为60.7%和41.2%;Alfa其次,增幅18. 2%;F0C0或F1C0处理土壤总有机碳与NatF间无显著差异;F1C2和F1C1处理土壤3个组分有机碳含量均显著高于其他熟化处理,与F1C1相比,F1C2处理对各组分有机碳提升作用更为明显;与NatF相比,Alfa处理土壤有机碳的增加主要表现为粉黏粒结合有机碳的增加;F1C0和F0C0处理土壤总细颗粒有机质和总粉黏粒中有机碳与NatF间无显著差异,总粗颗粒有机质中有机碳含量低于NatF。研究表明,在米豆轮作和传统耕作体系下,农田生态系统高量有机物料投入配施化肥能够加速黑土母质的熟化进程,快速提高土壤中活性碳库和惰性碳库的容量,是严重退化黑土有机质快速提升的有效措施。